uptown-automotive.com
 
Uptown Automotive Hobby Shop
The Biggest Little New and Used Car Showroom in Central New York
   
 

ANNUAL SPRING THAW MODEL SHOW
Scale Model Vehicle Display - Judged Contest - Vendors
Offering new and old model kits, aftermarket parts, detail accessories

Located in Utica, NY, the geographical center of New York State (check your map), the show is the work of
four young gentlemen, each of whom is a talented model builder specializing in trucks (though fully capable of other types of vehicles also).

Check it out on Facebook: Spring Thaw Scale Model Show

The show's website: http://daveski25.Wix.com/springthawmodelshow



Liquid Chrome

When a distributor told me that they tested a product that simulates chrome, and that it was "amazing", I doubted.

How many times in decades of modeling had I heard of similar products? I requested a sample. No sample. So I ordered one and paid for it. I tried it. It works! I BELIEVE! It's called Liquid Chrome, and is similar to a felt tip paint marker, comes in either of three tip sizes, is easy to use, and looks great when it dries.

I tried it on plastic, resin, and pot metal. It works! Far superior to silver paint, less aggravating and tedious than Bare Metal Foil, and unlike All Clad, requires no undercoat nor buffing. I recommend this product, not because I sell it, but because I use it...and it works!

                                                                                                                                                   Jim Amado


                                                            VEHICLE NOMENCLATURE

Body styles of vehicles were given names which reflected their intended usage. Auto manufacturers also gave names to the various vehicles within their product ranges. Somewhere along the line, our society has deteriorated into a “close enough is good enough”, or “whatever” attitude regarding many things, and wrong information is disseminated routinely even by “experts” who should know better. Why?

How difficult is it, especially in this age of the computer where all sorts of information is available literally at one’s fingertips, to determine the correct name for a vehicle’s body style, or a specific model of a given make?

One would logically presume that a car magazine, a model car magazine, or an author therein, and/or a company producing scale model vehicles, would be knowledgeable about the subject matter which they are presenting, and both know and use the correct nomenclature for that subject.

Revell has recently rereleased their ‘53/’54 Chevrolet sedan delivery model kit. Why do they mislabel it as a “panel”? Certainly they know better! A panel truck is truck based, and has double loading doors at the rear. A sedan delivery is passenger car based and, with few exceptions, has a single loading door.  Examples of panel trucks are Revell’s ’37 Ford, kit #4930 (and prior releases), and the ’55 Ford which had been done in various guises under the Monogram label. Examples of sedan deliveries are the ’31 Ford, formerly done by Revell, and the ’39 Chevy, formerly done under the Monogram label. So, it’s not like Revell is unfamiliar with both body types; which makes it all the more confusing as to why they couldn’t or didn’t call the newly released model by its correct name.


Some who write about real cars are also guilty of misnomers, which again is unnecessary and irritating. To them I say: “Know your subject matter! Do your homework!” we who read magazines do so not only for entertainment, but also to gain or enhance knowledge. Fords, for example, are often mislabeled in articles. It’s really not that difficult to follow Ford’s nomenclature lineage; especially if the author is writing about Fords, a reader would presume said author to be knowledgeable about Fords, and know the facts he or she is relating.

Herewith is an attempt to clarify some Ford facts. Beginning in 1951, Ford called their two door hardtops “Victorias”. In 1954 they offered a two door hardtop with a plexiglas roof section over the front seat; this was called a “Skyliner”. Ford convertibles were called “Sunliners”. In 1955 Ford offered the Victoria (two door hardtop), a “Crown Victoria” which, though not a true hardtop, had a chrome B pillar, and targa bar, or tiara, which went over the roof and connected to the B pillar on the other side. A third offering was the Crown Victoria with the Plexiglas roof option; this was called a Crown Victoria Skyliner. All three versions were also offered in 1956, as well as the Sunliner convertible, and a new body style: a four door hardtop. The four door hardtop was called a Town Victoria.

 In 1957 the Plexiglas roof option was no longer offered, yet the Skyliner name was continued, now being applied to the then new retractable hardtop. So the ’57 line included two and four door Victorias, a Sunliner convertible, and a Skyliner retractable hardtop.

The Skyliner, with its folding steel roof, was continued into 1958 and 1959. In 1959 there were also two models of fixed roof two hardtops in the Ford line. The Fairlane 500 had a thin C pillar, and the later released Galaxie (first year for that name) had a “formal roof”, with a more squared C pillar, like that of the then current Thunderbird. Interestingly, the Skyliner had used that similar C pillar since its inception in 1957.

In 1960 the retractable hardtop, and the Skyliner name, were gone. Ford two door hardtops had a new thin pillar design, and were called “Starliners” (a name which Studebaker had used in 1953), while the four door hardtops retained the Thunderbird roof line. Convertibles were still called Sunliners.

In ’61 a “formal roof” Galaxie two door hardtop, called a Club Victoria, shared the roof line of the four door Town Victoria, and both were joined by a thin pillar two door hardtop, similar to the ’60 Starliner, and carrying the same name.

For 1962 the only two door hardtop roof was the squared T-Bird style, which was found to be less than ideal for NASCAR competition, so Ford went into their bag of tricks, and pulled out a fiberglass lift off hardtop which could be attached to their convertible bodies. This roof line was virtually identical to the ’60 & ’61 Starliners, and was called the “Starlifter option”. Ingenious, but soon declared illegal by NASCAR.

Free useless information: The U.S. Air Force had a cargo plane, the C-141, which was also called a Starlifter. Probably capable of carrying the entire starting grid of NASCAR cars…

 
                                                                                                                                            Jim Amado  
                            

                                        How To Know AMXactly What You’re Looking At

The American Motors two passenger coupe, known as the AMX, was modeled by four different model companies back in the day…sort of. 

Actually, it was made by only three model companies, but marketed by four.  When the car was first introduced in mid 1968, AMT offered a scale model kit in 1/25 scale, and MPC offered a kit in 1/20 scale.  Interestingly, however, AMT did not produce the 1/25 scale model .  JoHan did. It was felt that AMT was the better known company, so it was marketed by them.  The AMT kit number was 2568. According to some sources, JoHan also made promotional models for the AMC dealers in 1968, with and without friction motors.

JoHan  made the ’69 in 1/25 scale, again marketed by AMT, under kit #T294. Promotional models were also offered by JoHan, for the AMC dealers. The ’69 AMX has been reissued by JoHan numerous times. In a kit, as one of their “USA Oldies” series, and  as the “Drag-on Lady” Shirley & H.L. Shahan  Super  Stock drag racing car (kit # C3069), and yet again as the same (drag)car inaccurately  labeled as a “Pro Street” car. This last version was essentially the “Drag-on Lady” kit, without the decals; it lacked the Pro Street characteristic narrowed rear end, and tubbed rear wheel wells.

Revell, in 1/32 scale, kit # H1296, and AMT, in 1/43 scale, (various releases) also modeled the ’69 AMX, but here our focus is on the larger scale renditions.  MPC offered two kits of the ’69 in 1/20 scale: kit #2002, was the stock version, and kit # 2004 was the “Yankee Clipper funny car drag version.

The ’69 AMX has been recycled several times under the JoHan name as a “Promotional” model. The most recent releases were unfortunately inaccurate, in that they had 1970 interiors.  Later releases of the drag car kit (#C3069) also included the incorrect interior.  

For 1970, AMT kit # Y722 was a 1/25 scale AMX, and MPC kit # 3170 was a 1/20 scale kit. Promotional models of the ’70 were done in 1/25 scale by JoHan.

 Here’s how to accurately identify each of the three years. Externally, the 68(1/2), and the ’69 are identical; the exterior of the ’70 differs in hood, grille, taillights, and rocker panel molding. The real key, however , is the seats.  The ’68 bucket seats had low backrests, the ’69 had headrests, and the ’70 had highback (integrated headrests) bucket seats. The upholstery pattern was also different in the 1970.

Unfortunately, though the name JoHan (actually a contraction of the name of the founder, John Hanley) remained, the company changed hands a few times in recent years, and things got a bit confused. The most recent releases of the AMX models, both the kits and the reissued promos, though intended and labeled as 1969s, had ’70 interiors with the high back bucket seats, and incorrect (for ’69) upholstery pattern. 

 

                                                                                                   Jim Amado  


                                                    The Best Little Show No One Knows About

That is how Gary Wallace describes the model show which is more commonly called the Fulton model car show. For those who may not know, Fulton is located in northern NY State, approximately one hour above Syracuse. But don’t go there to find this show, because it isn’t there. “The best little show no one knows about” grew so big that it had to be moved to larger quarters, so perhaps Mr. Wallace is wrong in his assessment.

 Who is Gary Wallace? Truck modelers may recognize him as GW Trucks, a producer of high quality resin products for their hobby. What many may not know is that he has been an amateur race car builder and driver, and a long time scale model builder himself, having fared very well in model contests, especially the truck classes, for many years.

 The Fulton Model Show, having enjoyed its twentieth birthday in November 2011, is his brainchild, and his baby. It seemed to many that model contests sponsored by some model clubs tended to favor their own members. Contestants not affiliated with the club which put on a show, didn’t appear to be considered or judged according to their model’s merits. Throughout the years this observation had been made by, and became a complaint of, several modelers at various shows.

 Gary decided to do something about it. Teaming up with his brother-in-law, Dan, and a fellow model builder and friend, Jan, they began holding a show which they intended would welcome all modelers and treat each fairly and equally. The show includes a contest, display area for models not competing for awards, and a large vendor area. From the beginning, it was, and has remained, a fun show, bringing together talented modelers from Quebec, and Ontario, Canada, and several areas of New York State. In recent years, “the… show no one knows about”, has drawn modelers from Vermont, Pennsylvania, Indiana, New Jersey, and Ohio. OOPS! Somehow, apparently people DO know about it!

 While open to all types of scale model vehicles and equipment, and with 200 models entered in the “twentieth anniversary” show, and all types represented, this show has nonetheless become heavily truck oriented. I dare say it has become “holy ground” for model truck fans, and enjoys one of, if not THE, largest model truck attendance of any model show in the northeast. Notice the use of the word “fans”, rather than “builders”; this because even those who may not actually construct truck models, will certainly find much to enjoy both on the contest tables, and the display tables.

 The quality of the models is among the best one is likely to see. ‘50s era custom cars from Syracuse builders, huge off road work trucks from our Canadian neighbors, first time entries from young builders, and every other imaginable vehicle on the tables leave an observer thinking that he or she is walking through a museum.

 In an adjacent room, there were approximately forty tables of vendors offering old model kits, parts, aftermarket details, accessories, and other model car and truck related “goodies”.

For this, the “twentieth anniversary” show, in addition to the usual 1st through 3rd place awards in the seventeen categories, and the many special awards given annually, the team decided to do something which they hadn’t done before.  As was explained at the end of the awards presentations: with three judges, each may not always agree with the other two. Despite the usual consensus which results in a 1st, 2nd, or 3rd place award, there are times when one of the judges feels that a particular model “speaks” to him for a reason known only to himself.  So this year, (adding to the fun factor previously mentioned) they handed out three unique prizes, each selected by only one judge himself: The “Gary Award”, the “Dan Award”, and the “Jan Award”, each went to a deserving modeler, based on what the judge saw in the particular model he had chosen. This unexpected twist was well  received by everyone in attendance, and a good time was had by all!

 Gary credits his brother-in-law Dan for much of the show’s success, as a result of the hard work and effort he has invested throughout the years.

 So where will this “best little show no one knows about” be found? Not far from Fulton, At the “Volney Fire Department Barn”, in Volney, NY.  Which, by the way, isn’t a barn at all; it is a large, modern structure with two huge areas devoted to the Fulton Model Show, on the last Sunday before Thanksgiving, every November.

 Get building! Then get out your GPS Navigation and find your way to “The best little show no one knows about”…see you there!

 

                                                                                                                                     Jim Amado

                                                                                                      


WE DEAL IN CARS ON A SMALL SCALE
Jim Amado: The plastic surgeon, builder, collector, writer.

                                                                                                                                                                                                                                          page updated 3/7/2017